MARTIN 485RS Optical Insolated Splitter

( Brand: Martin ), ( Manufacturer Part Number: 485RS ), ( Dmx Control: Yes ), ( Power: 1600w ), ( Type: Fog Machine ), ( Control: Timer )

Review MARTIN Optical Insolated Rs 485

The 485RS Martin Optical Isolated 480-Splitter is a high-quality, reliable device designed for industrial automation and control systems. This device is specifically designed to split and isolate signals on a 4-20mA current loop, ensuring data integrity and preventing signal interference.

The 485RS splitter is an optical isolator, which means it uses optoelectronic components to transmit signals between two isolated circuits. This feature is crucial in preventing common-mode voltage issues and electrical noise from affecting the signal. The optical isolation also provides a high degree of protection against electrical surges and transients, ensuring the longevity of your system.

The 485RS splitter supports up to four separate 4-20mA current loops, each with its own output. This makes it an ideal solution for applications where multiple devices need to be connected to a single 4-20mA bus. Each output is fully configurable, allowing you to adjust parameters such as gain and output limits to suit your specific requirements.

The device is built to withstand harsh industrial environments, featuring a rugged, metal enclosure that is resistant to dust, moisture, and other environmental factors. The 485RS splitter is also designed to operate over a wide temperature range, from -40 C to 85 C, ensuring reliable performance in a variety of applications.

In summary, the 485RS Martin Optical Isolated 480-Splitter is a robust and reliable solution for splitting and isolating 4-20mA current loop signals in industrial automation and control systems. Its optical isolation feature ensures data integrity and protection against electrical noise, while its configurable outputs and rugged construction make it ideal for use in harsh environments.

1. Optical Isolation: The 485RS Martin Optical Isolated 485 Splitter provides optical isolation between the transceiver and the bus, reducing the risk of electrical noise and interference, which can improve the reliability of data communication.

2. Cost-Effective: By using a splitter, you can extend the length of your 485 bus without the need for additional wiring and connectors, making it a cost-effective solution for expanding your network.

3. Easy Installation: The 485RS Martin Optical Isolated 485 Splitter is easy to install and requires minimal configuration, making it a straightforward solution for extending your 485 bus.

1. Limited Number of Ports: The 485RS Martin Optical Isolated 485 Splitter only has two ports, which may not be sufficient for more complex systems that require multiple devices to be connected to the same 485 bus.

2. Potential for Signal Loss: The use of a splitter can potentially result in signal loss, which may affect the performance of your 485 network. It is important to ensure that the splitter you choose has a high enough split ratio to minimize any signal loss.

3. Limited Compatibility: The 485RS Martin Optical Isolated 485 Splitter may not be compatible with all 485 devices, so it is important to check the specifications of both the splitter and your devices before making a purchase.

The 485RS Martin Optical Isolated 485 Splitter is a useful tool for extending the length of your 485 bus and improving the reliability of your data communication. Its optical isolation feature and easy installation make it a cost-effective solution for many applications. However, its limited number of ports and potential for signal loss may be a drawback for more complex systems. It is important to consider these factors when deciding whether the 485RS Martin Optical Isolated 485 Splitter is the right choice for your needs.

If you are looking to extend the length of your 485 bus and improve the reliability of your data communication, the 485RS Martin Optical Isolated 485 Splitter is a worthwhile consideration. However, it is important to ensure that it is compatible with your devices and that it has a high enough split ratio to minimize any signal loss. If you require more than two ports, you may want to consider other solutions that offer more flexibility. Ultimately, the best choice for you will depend on your specific requirements and budget.

Details:

Sold as shown, in found condition Inc 120218s15.

specifications stagelightacc:

• brand: Martin
• mpn: 485rs
• dmx control: Yes
• power: 1600w
• type: Fog Machine
• control: Timer

General stagelightacc:

• condition: Used
• Stage Lighting Effects > Atmospheric Effects Machines
• in stock: Yes

Offer stagelightacc:

• quantity: 1
• Started: December 2, 2018, 8:37 pm
• Sold: 0
• best offer: false
• bids: 0

Seller stagelightacc:

• # feedbacks 12-03-18: 6649
• rating 12-03-18: 99.0%
• zipcode: 48030
• city: Hazel Park, Michigan

Returns stagelightacc:

• paid by: Buyer
• time: 30 Days
• type: Money Back
• policy: returns accepted

Shipping stagelightacc:

• handling: 1 days
• cost: $7.0
• type: Flat

Ratings:

1. As described. 12-01-18
2. work great - fixed the problem. Thanks 12-01-18
3. OMG thanks so much exactly what we needed fast ship and units look new 12-01-18
4. Item received as listed. 12-01-18
5. reference number given and over-packed as requested. Thank you. 12-01-18

Payments stagelightacc:

• PayPal

Martin 485RS Is Similar To:

• Optical Stock Martin Pcb Sensor 250 62003008 Mac Duo (25.5% similar) Shipping is to the us only. It is several years old and but never opened. Martin duo optical sensor pegboard number this duo optical sensor PCB is for a MAC250 but could be used with a number of different fixtures condition the piece is in brand new and unopened as pictured...(January 15th, 2015)